Vespa kapa kotača
2,70 € s PDV-om
Drugi su kupili
Pratimo tvoju strast!
Imate 14 dana da donesete odluku
Kapica osovine kotača, kap
| Kod proizvođača: | JMP |
|---|---|
| Dimenzije pakiranja: | 72 x 162 x 43 mm |
| Težina pakiranja: | 13 g |
- poklopac bubnja kočnice
- napravljen od plastike
- posvećen popularnim Vespa skuterima
Johannes J. Matthies GmbH & Co. KG , Hammerbrookstr. 97 , 20097, Hamburg , DE, [email protected]
Isplati se kupiti
Slično
Recenzije o proizvodu
- 5
- 4
- 3
- 2
- 1
Pronašli smo 3 odgovarajućih recenzija.
Provjerena recenzija
The part fits perfectly. It is of high quality and fit without any problems on the Piaggio ZIP MK1 1995 model. It fits normally into the rear wheel well and hides the wheel bolt.
Provjerena recenzija
Vespa kapa kotača
The part fits perfectly. It is of high quality and fit without any problems on the Piaggio ZIP MK1 1995 model. It fits normally into the rear wheel well and hides the wheel bolt.
Provjerena recenzija
The part almost fits. It is of high quality and with minimal modifications it fit the Piaggio ZIP MK1 1995 model. I measured it with the original cable, which was already damaged by corrosion. The only thing that didn't fit me was the attachment to the brake lever, but I easily solved that.
Provjerena recenzija
Vespa kapa kotača
The part almost fits. It is of high quality and with minimal modifications it fit the Piaggio ZIP MK1 1995 model. I measured it with the original cable, which was already damaged by corrosion. The only thing that didn't fit me was the attachment to the brake lever, but I easily solved that.
Provjerena recenzija
Čep savršeno pristaje stražnjem kotaču. Dostava i usluga na najvišoj razini. Sigurno ću ponovno posjetiti ovu trgovinu. Hvala i srdačan pozdrav.
Provjerena recenzija
Vespa kapa kotača
Čep savršeno pristaje stražnjem kotaču. Dostava i usluga na najvišoj razini. Sigurno ću ponovno posjetiti ovu trgovinu. Hvala i srdačan pozdrav.